Giacomini

Pressure restricting valve. Double female - Angle.Forged brass. Used with a fire hose rack assembly.Water pressure is controlled by adjustable flow...

1/4 Turn BIB cock, with male threaded connection-hose connection. Chrome nickel plated brass finishing. Standard port. Red T-handle (water use)  * ...

Hydraulic separator with female threaded or flanged connections, with insulation.Equipped with automatic air vent valve and drain cock with hose ...

Introductory price  Freezing protection valve is key to prevent damages to the system caused by the formation of ice. Specifically designed for...

Multilayer and plastic pipe adaptor. For plumbing systems.  DB manifolds b.18 x 18x2 

Eurocone 18mm x (16mm x 2mm) Multilayer & Plastic Pipe Connector

Adaptors for plastic or multilayer pipes for use in plumbing systems. Compliant with EN 1254-3 Standard. Black O-Ring compliant with EN 681-1.  

Static balancing valve with fixed orifice (Venturi principle). Brass body with female-female connections and 1/4"F connection for differential pres...

Differential pressure controller, equipped with a copper capillary pipe 1 m length.Differential pressure setting:5÷30 kPa in "Low" modality;25÷60 k...

Bottom mount pressure gauge with graduate scale. Specs  

Ball valve with full bore for connection of circulation pump ∙ loose swivel with flat seal x pressure connection for soft, semi-hard and hard coppe...

Ball valve with end feed connections for copper pipes. • Standard port• Valve made of UNI EN 12165 CW617N brass• Stem with double O-Ring• ...

pair of ball valves with thermometers (R540 series), with female-tail piece male threaded connections. Chrome plate finishing. Standard port. Red ...

R285F valves specific for circulators supplied with optional integrated check valves Brass finishing. Standard port. Extended T-handles with red an...

Thermo-electric actuator, normally closed. Cable length 1 m. With new high efficiency thermo-electric sensor. Can be used to replace the manual han...

Modular manifolds with lockshield and flow meter (scale 0,5-5 l/min), with quick connection, with outlets with base or Eurocone adaptor connectio...

R53MT Start and end module of modular manifolds with lockshield and flow meter (scale 0,5-5 l/min), with quick connection, with outlets with base...

Modular manifold with shut-off valves with manual handwheel, with quick connection, with outlets with base or Eurocone adaptor connections. handwhe...

Start and end module of modular manifolds with shut-off valves with manual handwheels, with quick connections, with outlets with base or Eurocone a...

Contact thermometer for R749F T-handle.Scale 0÷120 °C, Ø40 mm. insert into R749F T handle.  Video  

Pipe radius support 14mm - 18mm Required for both the flow and return of each port.

Brass manifold for HVAC systems with dynamic flow balancing and independent setting for each individual circuit.Outlets connections for copper, p...

Technopolymer pre-assembled modular manifold for HVAC systems, with dynamic flow balancing and independent setting for each individual circuit. O...