Heat pumps

DISMART - Swiveling deaerator for heating systems • Body made of CB753S brass• Connection to pipelines: F-F• 1/2” bottom connection with plug• Swiv...

DISMART - deaerator for heating systems. • Body made of CB753S brass• Copper pipe connections with insulation shell  • Connection to 1/2” lower pa...

DISMART - deaerator for heating systems. • Body made of CB753S brass• Copper pipe connections• Connection to 1/2” lower part with plug• Swiveling a...

The Giacomini R851VT is a full-port brass press ball valve with an extended T-handle, designed for pipework with thick insulation. Ideal for heatin...

  EPP KH box  are available nominal sizes from DN15 to DN50 The boxes are available in anthracite    The EPP KH box accommodate a R851vT pre...

Ball valve with full bore for connection of circulation pump ∙ loose swivel with flat seal x pressure connection for soft, semi-hard and hard coppe...

  EPP KH-P box  are available nominal sizes from DN25 to DN32 The boxes are available in anthracite     The EPP KH - P boxes accommodate the...

  ANGEL❄  anti-freeze protection valves (2 Pack)   These antifreeze valves allows the circuit medium to be drained when fluid temperature rea...

  Freeze protection valve is key to prevent damages to the system caused by the formation of ice. Specifically designed for monobloc heat pump ...

8311 brass connection complete with swivelling nut • Connections: Female-Female• Flat gasket in EPDM• CW617N brass    

8313 threaded tail with flat face swivelling G nut (Brass)  • Connections: Male-Female• Flat faced gasket in EPDM• CW617N forged brass 

8321 Chrome-plated connection complete with swivelling nut • Connections: Female-Female• Flat gasket in EPDM• CW617N brass     

8323 threaded tail with flat face swivelling G nut (Chrome)  • Connections: Male-Female• Flat faced gasket in EPDM• CW617N forged brass  

3-way diverter zone control ball valve equipped with unions, nuts and actuator with manual release.   Specs   

Chrome-plated 2-way zone control ball valve equipped with unions, nuts and actuator with manual release. Spec  

Chrome-plated 3-way diverter zone control ball valve with by-pass Tee equipped with unions, nuts and actuator with manual release Specs 

 Buffer / Volumiser  • Available in 40L and 80L versions• Complete with insulation• Complete with wall brackets• Heat pump side connections 1”1/4M ...

PDHW hydronic heat pump modules are factory-assembled units that have been equipped with all the hydronic components that are required to ensure en...

  FAR Rubinetterie 2161 Low loss separator complete with  Giacomini R285F 1'' to 1'' 1/2'' pump valves  FAR Rubinetterie 2250 Deaerator ...

   FAR Rubinetterie  1 x 2 distribution header  • External painted surface• Centre distance between ports: 90mm • Side connections: 1” male• Outlet...

           FAR Rubinetterie 216D booster unit with manual mixing valve  - high efficiency pump  -  shut-off valves -  temperature gauges with 0 ÷ ...

2166 Booster unit for high temperature  Wilo high efficiency pump  shut-off valves temperature gauges with 0 ÷ 80°C scale PPE insulation  ...

       2167 Set point booster unit set point thermostatic mixer with 18 ÷ 55°C high efficiency pump shut-off valves temperature gauges wit...

Brass manifold for HVAC systems with dynamic flow balancing and independent setting for each individual circuit.Outlets connections for copper, p...